[Free] 2018(May) EnsurePass Braindumps Microsoft 70-685 Dumps with VCE and PDF 91-100

Ensurepass.com : Ensure you pass the IT Exams
2018 May Microsoft Official New Released 70-685
100% Free Download! 100% Pass Guaranteed!

70-685

Question No: 91 DRAG DROP – (Topic 14)

A company has computers running Windows 7 Enterprise. Users in the Finance department are part of the local Users group on the computer but are not part of the local Administrators group.

A user in the Finance department wants to install a legacy application. This application must be installed with the same Windows account as the account that will use the application. The application also requires administrative permissions in Windows to install and run.

You need to enable the user to install the application and ensure that it runs with administrative permissions.

Which four actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 92 – (Topic 14)

A client computers on your company network run Windows 7. Employees log on to their computers as Standard users.

There is a zero-day malicious software attack affecting your network. Employees receive User AccountControl (UAC) messages frequently requesting permission to elevate privileges. You know that this malicious software attack is responsible for these UAC prompts.

You need to ensure that employees are unable to provide elevated credentials. What should you do?

  1. Configure the Group Policy User Account Control: Only elevate executables that are signed and validated setting to Disabled.

  2. Configure the Group Policy User Account Control: Switch to the secure desktop when

    prompting for elevation setting to Disabled.

  3. Configure the Group Policy User Account Control: Behavior of the elevation prompt for standard users setting to Automatically deny elevation requests.

  4. Configure the Group Policy User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode setting to Prompt for consent for non-Windows binaries.

Answer: C

Question No: 93 HOTSPOT – (Topic 14)

A company has computers that run Windows 7 Enterprise.

User1 has a computer running the 32-bit version of Windows 7. User1 wants to share a USB printer with User2. User2 has a computer running the 64-bit version of Windows 7.

On User1#39;s computer, you need to configure the print server properties so that User2#39; s computer will not prompt for new drivers when trying to print to the shared printer.

From the Print Server Properties dialog box, what should you select? To answer, select the appropriate button in the work area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Click the “Add” button.

Ensurepass 2018 PDF and VCE

Question No: 94 – (Topic 14)

All client computers on your company network run Windows 7. All servers in your company run Windows Server 2008 R2. Employees use a VPN connection to connect to the company network from a remote location.

Software updates are not being applied to the client computers because employees log off before the updates are applied.

You need to ensure that software updates are always applied to the client computers.

What should you do?

  1. Configure the Direct Access feature.

  2. Configure the VPN Reconnect feature.

  3. Use Group Policy to publish a package that contains the software updates.

  4. Use Group Policy to redeploy a package that contains the software updates.

Answer: A

Question No: 95 – (Topic 14)

All client computers on your company network run Windows 7.

An application has stopped working. The application is dependent on a service that runs automatically and logs on to the domain by using a dedicated service account. You also discover that an entry in the event log has the following message:

quot;Logon failure: unknown user name or bad password.quot; You need to ensure that the service runs successfully.

What should you do?

  1. Add the dedicated account to the local Administrators group.

  2. Add the employee user account to the local Administrators group.

  3. Reset the employee password and configure it to never expire.

  4. Reset the service account password and configure it to never expire.

Answer: D

Question No: 96 – (Topic 14)

All client computers on your company network run Windows 7. The computers are members of a Windows Server 2008 R2 domain.

You need to ensure that data stored on removable drives is encrypted. What should you do?

  1. Set the Removable Disks:Deny write access option by using Group Policy.

  2. Set the Control use of BitLocker on removable drives option to Allow users to apply BitLocker on removable drives by using Group Policy.

  3. Set the Configure use of passwords for removable data drives option to Require password for removable data drive by using Group Policy.

  4. Enable the Deny write access to removable drives not protected by BitLocker option by using Group Policy.

Answer: D Explanation:

Ensurepass 2018 PDF and VCE

http://windows.microsoft.com/en-US/windows7/What-Group-Policy-settings-are-used-with- BitLocker

Question No: 97 – (Topic 14)

All client computers on your company network run Windows 7 and all servers on your company network run Windows Server 2008. The computers and the servers are members of an Active Directory Domain Services domain. A network administrator moves the Internet Information Services (IIS) server to a different network segment and configures the appropriate network settings.

Employees are unable to connect to the IIS server. You confirm that the network settings are appropriate.

You need to ensure that all employees are able to connect to the IIS server. What should you do?

  1. Restart the DNS Client service on the DNS servers.

  2. Restart the DNS Server service on the DNS servers.

  3. Run the nbtstat r command on the employees#39; computers.

  4. Run the ipconfig /flushdns command on the employees#39; computers.

Answer: D Explanation:

Whenever you type a URL into a Web browser, your PC asks your domain name service server (DNS server) to translate that URL into an IP address, and caches that information. That cache can occasionally become outdated or corrupt, which can cause Internet connection problems.

You can use the ipconfig /flushdns command to flush and reset the contents of the Domain Name System (DNS) client resolver cache. During DNS troubleshooting, if necessary, you can use this procedure to discard negative cache entries from the cache, as well as any other dynamically added entries.

Resetting the cache does not eliminate entries that are preloaded from the local Hosts file. To eliminate those entries from the cache, remove them from this file.

Membership in Administrators, or equivalent, is the minimum required to complete this procedure.

To flush and reset a client resolver cache:

Open a command prompt. To open an elevated Command Prompt window, click Start, point to All

Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.

Ensurepass 2018 PDF and VCE

At a command prompt, type the following command, and then press ENTER:

Ensurepass 2018 PDF and VCE

Question No: 98 – (Topic 14)

All client computers on your company network were recently upgraded from Windows Vista to windows 7.

Several employees use a scanner to import document images into a database. They install a new scanning application on their computers. The application updates the device driver for the scanners as part of the installation process.

Employees report that the application can no longer connect to the scanner. You need to ensure that the employees can use the scanner.

What should you do?

  1. Roll back the device driver to the previous version.

  2. Reinstall the application in Windows Vista compatibility mode.

  3. Set the application compatibility properties to run the application as an administrator.

  4. Restart the computer by using the System Configuration tool to load only basic devices and services.

Answer: A Explanation:

Chapter 1 Lesson 1 p 17

Appendix C p 485 / 486

Chapter 5 p 275 / 276

Ensurepass 2018 PDF and VCE

How to Roll Back to the Previous Version of a Device Driver:

Device Driver Roll Back reinstalls the driver you were using previously and restores any driver settings that were changed when you added the new driver. To roll back a device driver to a previous version:

Log on to the computer by using an account with administrative privileges. Click Start, and then click Control Panel.

Under Pick a category, click Performance and Maintenance. Under or pick a Control Panel icon, click System.

On the Hardware tab, click Device Manager.

In the device list, expand the device type branch that you want to work with. For example, Display adapters.

Right-click the device that you want to work with, and then click Properties.

On the Driver tab, click Roll Back Driver. Click Yes when you receive the following

message:

Are you sure you would like to roll back to the previous driver? The previous device driver is restored. Click Close.

10. Quit Device Manager, and then click OK.

Note: that you cannot restore printer drivers with Device Driver Roll Back.

Driver Roll Back only allows you to roll back a driver once. In other words, Windows 7 only keeps a copy of the very last driver installed. It does not keep an archive of all previously installed drivers for the device.

http://pcsupport.about.com/od/windows7/ht/roll-back-driver-windows-7.htm

Question No: 99 HOTSPOT – (Topic 14)

A company has computers running Windows 7 Enterprise.

You need to enable a user to make a folder on a local computer available to other computers by using the FTP protocol.

Which Windows feature should you turn on? To answer, select the appropriate check box in the dialog box.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation: Select “Internet Information Services”

Ensurepass 2018 PDF and VCE

Question No: 100 – (Topic 14)

You are troubleshooting performance issues on a Windows 7 Enterprise client computer. An unfamiliar service is running on the computer.

You need to recommend the solutions that identify which process identifier (PID) is associated with the service.

What should you do? (Choose all that apply.)

  1. Pun the System Configuration utility (rnsconfig.exe) and view the Services tab.

  2. Run the sc query command.

  3. Use Windows Task Manager and view the Services tab.

  4. Run the sc queryex command.

  5. Run the Services management console.

Answer: C,D Explanation:

http://technet.microsoft.com/en-us/library/dd228921(WS.10).aspx

In order to get to know, or view, retrieve and identify the process ID or PID of the processes running in Windows operating system, users or administrators can make use of Task Manager. However, Task Manager does not display PID information by default. To display the PID value in Task Manager, go to Processes tab, click on View menu, and then click on Select Columns…. In the “Select Columns” or “Select Process Page Columns” dialog, tick and check the checkbox for PID (Process Identifier), and click OK.

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

100% Ensurepass Free Download!
Download Free Demo:70-685 Demo PDF
100% Ensurepass Free Guaranteed!
Download 2018 EnsurePass 70-685 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *