[Free] 2018(Aug) Dumps4cert Microsoft 70-695 Dumps with VCE and PDF Download 51-60

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 Aug Microsoft Official New Released 70-695
100% Free Download! 100% Pass Guaranteed!

Deploying Windows Devices and Enterprise Apps

Question No: 51 – (Topic 5)

You plan to deploy a Windows 8.1 Enterprise image that contains a volume license version of Microsoft Office 2013. The image will be captured from a reference computer. Office is activated by using the Key Management Service (KMS).

On the reference computer, you install Office 2013 and you verify that all of the Office applications start properly.

You need to ensure that when the image is deployed, users are not prompted for activation when they first start an Office application.

What is the best action to perform before you capture the image? More than one answer

choice may achieve the goal. Select the BEST answer.

  1. Rearm Office 2013 on the reference computer.

  2. Run setup.exe and specify the /modify switch.

  3. Modify the Config.xml file.

  4. Reinstall Office 2013 on the reference computer.

Answer: A

Explanation: References: https://technet.microsoft.com/en-gb/library/dn385362.aspx

Question No: 52 – (Topic 5)

You have a server named Server1 that runs Windows Server 2012 R2 server.

You deploy a Microsoft System Center 2012 R2 Configuration Manager site server to Server1.

You need to ensure that Server1 can support Zero Touch Installation (ZTI) deployments. The deployments must minimize the amount of network bandwidth used.

Which two actions should you perform? Each correct answer presents part of the solution.

  1. From Server Manager, install the Windows Deployment Services server role.

  2. From the Windows Deployment Services console, configure the PXE Response settings.

  3. From the Configuration Manager console, add the distribution point site system role.

  4. From the Configuration Manager console, enable multicast on Server1.

  5. From the Configuration Manager console, enable PXE support for the clients on Server1.

Answer: C,E Explanation: References:

https://technet.microsoft.com/en-us/library/dn744272.aspx

Question No: 53 – (Topic 5)

You have a Windows Deployment Services (WDS) server.

You have a custom install image of Windows 8.1 Enterprise named Image1. The image is in an image group named ImageGroup1 and is the only image in the group.

You need to ensure that only users who are the members of a security group named Admins can deploy Image1 by using PXE.

What should you use?

  1. the Deny-WdsClient cmdlet and the RequestID parameter

  2. the Set-WdsClient cmdlet and the Group parameter

  3. the Set-WdslnstallImage cmdlet and the UserFilter parameter

  4. the Approve-WdsClient cmdlet and the RequestID parameter

Answer: C

Explanation: References:

https://technet.microsoft.com/en-us/library/dn283438(v=wps.630).aspx

Question No: 54 HOTSPOT – (Topic 5)

Your company has a Microsoft Office 365 subscription.

From a network share, you plan to deploy Office 365 ProPlus to the client computers in a branch office by using the Office Deployment Tool. The share is located at \\Server1\Office.

Some of the users in the branch office are consultants who often work for extended periods in customer locations. All other users in the branch office work in the customer service department.

During testing, you discover that Internet traffic spikes excessively during the installation of updates.

From the Office Deployment Tool, you create a configuration file named Config1.xml for the consultants and you create a configuration file named Config2.xml for the customer service department.

You need to ensure that the Office applications on all of the client computers are updated regularly. The solution must minimize the amount of Internet traffic, whenever possible.

Which configuration file should you modify and which configuration element should you add to the configuration file? To answer, select the appropriate options in the answer area.

Dumps4Cert 2018 PDF and VCE

Dumps4Cert 2018 PDF and VCE

Answer:

Dumps4Cert 2018 PDF and VCE

Explanation:

Dumps4Cert 2018 PDF and VCE

References:

https://technet.microsoft.com/en-us/library/jj219426.aspx#BKMK_UpdatesElement

Question No: 55 – (Topic 5)

Your network contains one Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 is a Windows Deployment Services (WDS) server.

Computer technicians are allowed to configure disk partitions manually and to choose any operating system image when deploying an operating system by using WDS. All of the operating system images are in the same image group.

You purchase 10 new client computers.

You plan to deploy the same image of Windows 8.1 Enterprise to all of the computers.

You need to ensure that disk configuration and image selection for all of the computers is fully automated.

What is the best action to perform from Server1? More than one answer choice may achieve the goal. Select the BEST answer.

  1. Run wdsutil end specify the /Add-Device switch for each client computer.

  2. Run wdsutil and specify the /Set-Server switch.

  3. Run wdsutil and specify the /Add-ImageGroup switch.

  4. Create computer objects in Active Directory for each new client computer.

Answer: A

Explanation: References:

https://technet.microsoft.com/en-us/library/cc754289(v=ws.10).aspx

Question No: 56 – (Topic 5)

Your network contains three subnets named Subnet1, Subnet2, and Subnet3. A DHCP server named DHCP1 is on Subnet1. All of the client computers on all of the subnets receive an IP address from DHCP1.

Your company deploys a Windows Deployment Services (WDS) infrastructure to Subnet1.

You attempt to deploy Windows 8.1 Enterprise to new client computers in Subnet2 by using PXE boot, but the computers fail to start from PXE.

You verify that all of the TCP and UDP ports required for WDS PXE boot are allowed on the routers between the subnets.

You need to ensure that you can perform PXE boot installations of Windows 8.1 Enterprise successfully on the new client computers on all of the subnets.

What should you do?

  1. Add a remote access server to Subnet2 and Subnet3.

  2. Add a DHCP server to each subnet.

  3. From the WDS server, configure network address translation (NAT).

  4. From the properties of the DHCP scope, configure DHCP options 66 and 67.

Answer: D

Explanation: References: http://windowsitpro.com/networking/configuring-dhcp-and-wds

Question No: 57 – (Topic 5)

You have five Microsoft System Center 2012 R2 Configuration Manager Servers. The servers are configured as shown in the following table.

Dumps4Cert 2018 PDF and VCE

You need to ensure that the servers in the Seattle, Montreal, and New York City sites contain the same application packages. The solution must minimize administrative effort.

Which cmdlet should you run first?

  1. New-CMBoundaryGroup

  2. Add-CMDistributionPoint

  3. New-CMDistributionPointGroup

  4. Add-CMBoundaryToGroup

Answer: C

Explanation: References: https://technet.microsoft.com/en-gb/library/hh427335.aspx

Question No: 58 DRAG DROP – (Topic 5)

Your company purchases 32-bit and 64-bit BIOS-based computers.

You plan to deploy Windows 8.1 Enterprise to the new computers by using a Windows Deployment Services (WDS) server named WDS1.

The company has several departments. The requirements of each department are described in the following table.

Dumps4Cert 2018 PDF and VCE

You need to identity the minimum number of images that must be added to WDS1 to meet the department requirements.

How many boot images and install images should you identify? To answer, drag the appropriate numbers to the correct images. Each number may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Dumps4Cert 2018 PDF and VCE

Answer:

Dumps4Cert 2018 PDF and VCE

Question No: 59 HOTSPOT – (Topic 5)

You have a server named Server1 that runs Windows Server 2012 R2. Server1 is a Windows Deployment Services (WDS) server.

You add an x86 capture image named Image1 and an x64 capture image named Image2 to WDS on Server1.

The network contains the client computers configured as shown in the following table.

Dumps4Cert 2018 PDF and VCE

You need to identify which capture image can be used on each computer.

What should you identify? To answer, select the appropriate images for each computer in the answer area.

Dumps4Cert 2018 PDF and VCE

Answer:

Dumps4Cert 2018 PDF and VCE

Explanation:

Dumps4Cert 2018 PDF and VCE

References:

https://technet.microsoft.com/en-us/library/hh290675(v=ws.10).aspx

Question No: 60 – (Topic 5)

You have a 32-bit application named App1. Your company uses the following device types:

  • Windows tablets

  • Android tablets

  • iOS tablets

  • You need to recommend a solution to ensure that App1 can be used on all devices. What should you recommend?

    1. an app package (.appx)

    2. a RemoteApp program

    3. a Windows Installer (MSI) package

    4. A Microsoft Application Virtualization (App-V) application

    Answer: B

    100% Dumps4cert Free Download!
    70-695 PDF
    100% Dumps4cert Pass Guaranteed!
    70-695 Dumps

    Dumps4cert ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

    Leave a Reply

    Your email address will not be published. Required fields are marked *